DSX Grease is a blend of synthetic lubricants, polyol and submicron fluoropolymer particles that embed in and not on the bearing surfaces for protection against seizure on initial equipment start-up. DSX Grease will continue to provide long lasting wear protection at high speed running.

Use DSX Grease on:

  • Connecting Rods
  • Main Bearings
  • Camshafts
  • Valve Lifters
  • Guides
  • Rocker Arms
  • Pivots

Also used in gearboxes, differentials and wheel bearings in Trans Am Racing.

DSX Grease has been tested using ASTM D-2596, Measurement of Extreme Pressure Properties of Lubricating Greases (Four Ball Method) by FALEX Corp of Aurora, IL.

Summary of Testing Method

The testing device is operated with one steel ball under load rotating against three steel balls held stationary in the form of a cradle. The rotating speed is 1770 RPM +/- 60 RPM. Lubricating greases are subjected to a series of tests, each test having a duration of ten seconds at increasing loads until welding (seizure) occurs.

Results: with DSX Grease, the load increased to 800 Kg (Machine Limit) with no weld. The scar diameter was 2.5mm, which is very small.

DSX Grease is compatible with and will blend with all motor oils (petroleum or synthetic).

Cart

United States Sales

Phone:

+1-904-744-3400

Cell:

+1-904-708-6535

Fax:

+1-904-745-5319

International Sales

Contact

Lee Lippert

Phone:

+1-904-744-3400

Cell:

+1-904-708-6535


Send us a message!

DSX Equipment Technologies LLC
6999 Merrill Road
Suite 332
Jacksonville, Florida 32277

Share This